
New or refaced kitchen cabinets in Sloughhouse — IKEA, semi-custom, or fully custom, set level and true by GVD's own crews, one written fixed price.
GVD measures, installs, and finishes your cabinets under one accountable team. Here is the shape of a typical Sloughhouse cabinet install.
Recent GVD kitchen and cabinet projects, prioritized nearest Sloughhouse.
Kitchen cabinet installation in Sloughhouse covers everything from a straight swap of stock boxes to a full custom layout with a waterfall island. The installer you hire determines whether that swap goes smoothly or turns into a change-order fight.
Cabinet installers price by the linear foot of run, not by the square footage of the room, so two quotes for the same kitchen can diverge because one counts a longer wall or an added return the other left out. Ask each bidder for the linear-foot count they measured and confirm it against your own walls before you compare their totals. GVD gives you the full scope and one fixed price, so the number you approve is the number you pay.
GVD installs kitchen cabinets across the area using our own in-house crews rather than a rotating roster of referred labor. The crew that shows up on demo day is the crew that finishes the job.
A fixed-price quote is only meaningful if it covers the unknowns. Ours states what happens if demo turns up rot or old wiring, so that conversation happens before you sign rather than after.
Schedule a free in-home consultation: call (916) 269-0761.
Cabinets typically carry 30 to 40% of a full kitchen budget because they carry the labor hours, the hanging, the leveling, and the scribing that the rest of the room waits on. That proportion is why the cabinet decision drives the kitchen decision, and why knowing the real brackets before you call keeps the conversation grounded.
Full cabinet installation, cabinets and labor, $8,000 to $30,000. The installed total for a standard kitchen. Where you land depends on kitchen size measured in linear feet, cabinet tier, and how much of the existing kitchen has to come out first. Cabinets typically carry 30 to 40% of a full kitchen budget, driven by both product cost and the labor to set them.
Fully custom cabinetry, $150 to $500 per linear foot. Built to the exact dimensions of the room rather than from standard sizes, often with premium European hardware and typically a 6 to 10 week manufacturing lead time. The tier to choose when the layout is unusual or the storage requirement is specific.
Installers price by linear footage rather than by the room. A small galley kitchen with 10 linear feet of cabinetry costs less to install than an L-shaped kitchen with an island, even when both use the same cabinet line. For the full pricing breakdown by scope, see our main kitchen cabinets page.
Cabinets alone, installed, typically account for 30 to 40% of a full kitchen budget, driven by both product cost and installation labor.
The cost is driven by how many feet of cabinetry go up and how much has to come down first. Compare two bids on those two figures before you compare them on anything else.
The upgrades are individually small and collectively significant. Soft-close hardware, pullouts, a lazy Susan, under-cabinet lighting, crown molding: any one is minor, and four together move the total by 10 to 15%.
Room size is not the metric. A large kitchen with a short cabinet run is a smaller job than a compact kitchen packed with cabinetry on three walls.
Cabinet removal looks like the easy part and is where most of the avoidable damage happens. The uppers are anchored through a nailer strip into the studs, and prying at the face frame tears drywall rather than releasing the cabinet.
Cabinets are square. Houses, particularly older ones, are not. Reconciling the two is scribing and shimming work, and it is the single most common reason a cabinet quote turns into a change order.
Choosing between IKEA, semi-custom, and fully custom comes down to money and fit: how much you are willing to spend for exact-fit sizing and hardware quality, against a lower price point with more assembly and adjustment work on your end.
| Cabinet tier | Lead time | Fit and adjustability | Hardware quality |
|---|---|---|---|
| IKEA (SEKTION) | In stock to a few weeks | Limited sizing, fillers needed | Standard soft-close, entry-level |
| Semi-custom | 4 to 8 weeks | Modified stock sizes, more options | Blum, Hettich-grade hardware common |
| Fully custom | 6 to 10 weeks | Built to exact kitchen dimensions | Premium European hardware |
Fit is the other half of the decision. Limited stock sizing means filler strips, and a run built mostly from fillers looks like what it is.
Semi-custom cabinets are built in standard depths and heights but offered in a wider range of widths, finishes, and interior configurations than stock lines. They typically deliver solid plywood box construction and soft-close hardware well below the price of fully custom work. For most kitchens with a standard layout, semi-custom balances fit and cost without paying for bespoke joinery the room does not need.
Retailer installation is a reasonable choice for a simple standard-layout kitchen. It becomes a poor one when the walls need correction, the plumbing moves, or the electrical needs touching.
California sets a $500 threshold above which the work requires a licensed contractor. Cabinet installation clears that on almost any real kitchen, which makes the question less about preference than about compliance.
The red flags to watch for include no proof of a contractor's license for jobs over California's $1,000 threshold, no liability insurance certificate offered without you asking, cash-only payment requests, and no written scope of work. Any one of these should stop you before you sign.
Appliance and plumbing tie-in work, moving a sink base cabinet, rerouting a dishwasher line, or adjusting a gas range hookup, argues for a licensed contractor. In California, moving plumbing or electrical is licensed trade work, so it should be handled by a contractor whose classification covers it, not left to whoever installs the boxes around it. An unlicensed installer who touches a gas line creates a liability that lands on the homeowner if an inspector or insurer ever asks who did the work.
Cabinet work sits on the right side of the permit line more often than not, provided nothing behind the cabinets is being moved.
Permitting becomes necessary once the project moves plumbing or gas lines, changes electrical circuits, or alters a load-bearing wall. GVD handles the permitting process with Sacramento County whenever a project's scope crosses that line, so you are not the one tracking down inspections.
Permit history can come up when a home goes on the market, particularly for jobs that involved plumbing or electrical changes, since unpermitted work in those categories can slow escrow or surface during disclosure.
A straightforward cabinet installation, removal of old cabinets through final walkthrough, typically takes 2 to 4 days for a standard kitchen once the crew is on site, covering demo, wall prep, cabinet hanging, and hardware adjustment. The install days are not what stretches the calendar: custom and semi-custom cabinets carry a 4 to 10 week manufacturing lead time before the crew ever arrives.
Do these before install day and the crew starts on cabinets rather than on clearing your kitchen.
Ask every bidder the same questions and compare the answers rather than just the totals. The answers tell you more.
First visit is a measure and a scope conversation. Second step is a written fixed-price proposal. Third is scheduling, and by then every number is settled.
A single project manager stays with your job from that quote through the final walkthrough, coordinating the schedule, answering questions, and checking the work at each stage rather than handing you off between separate scheduling and installation teams.
One project manager at GVD carries your kitchen across measure, order, and install, which matters most in the weeks between the deposit and the delivery when a cabinet order sits with the manufacturer and jobs handed between offices go quiet. That single point of contact tracks the order date, the arrival, and the crew calendar without a re-handoff. Our own in-house crews hang the boxes, so a door reveal that sits wrong is corrected by the team that set it rather than booked as a separate trip. A national franchise routing rotating out-of-area crews into Sacramento County cannot hold that continuity. You can also see door styles and finishes in person before you commit, so the sample you approve is the product that arrives.
GVD Renovations holds California contractor license #989637 and an A+ rating from the Better Business Bureau. GVD is the 2025 James Hardie Service Excellence Award winner, the only California contractor to receive that award that year, and holds James Hardie Elite status. We are a family-owned company that uses our own trained crews on every job, backed by full liability and workers' compensation insurance.
We work across Sacramento County and neighboring jurisdictions, and where a cabinet project's scope reaches plumbing, gas, electrical, or structure, we handle that permitting process rather than leaving it to you.
Our Rocklin showroom is about 19.7 miles away. See cabinet materials, door styles, and hardware finishes in person before you commit to a layout.
Call (916) 269-0761 to get started. The consultation is free, the measure is what your order is built from, and the price we put in writing is the price you pay.
Trusted by Thousands of Homeowners Across Northern California
We bring the same crews, materials, and workmanship to every community around Sloughhouse.
A full cabinet installation in Sloughhouse — cabinets and labor — typically runs $8,000 to $30,000 depending on kitchen size, cabinet tier, and how much of the old kitchen comes out first. Fully custom cabinetry runs about $150 to $500 per linear foot.
IKEA is quickest and lowest cost but limited on sizing; semi-custom (about 4 to 8 weeks) modifies stock sizes with better hardware; fully custom (6 to 10 weeks) is built to exact dimensions for unusual layouts or specific storage needs.
Cabinets alone, in the same footprint, generally do not require a permit. One is needed once the project moves plumbing or gas lines, changes electrical circuits, or alters a load-bearing wall — and GVD handles that filing when it applies.
The install crew is usually in and out in 2 to 4 days. The longer part of a 6 to 10 week project is manufacturing lead time and your own decisions on finishes and hardware.
Refacing, meaning new doors, drawer fronts, and hinges over the existing cabinet boxes, or repainting the existing boxes, both cost less than a full replacement. Either works well when the boxes underneath are still structurally sound and the layout does not need to change.
Removal starts by unscrewing the cabinet from the nailer strip that anchors it to the wall studs, not by prying at the face frame. Countertops get unscrewed from the cabinet base and lifted clear before any cabinet comes down, which avoids cracking stone or laminate that is being reused.




